How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a unique set of steps to take to add an additional key. This requires an electronic handheld computer, referred to as Tech-2 which is to be used by the dealer. Then, a new transponder and key must be purchased.
Rotate your keys to stop one from deteriorating faster than another. This will also help keep your keys in good condition.
Replacement Case
The new key fobs are not like the older Saab keys. They are equipped with electronics that make it difficult to duplicate. This has made theft of cars much more difficult than twenty years ago. However, it has also made replacing lost keys a much more expensive task.
Every owner of a Saab 9-3 needs to have at least two functioning keys. It is costly to replace a lost key because it requires replacing the CIM module, and reprogramming the locking cylinders. Dealers charge between $100 and $200 to do this.
There are several ways to get around these expensive. Certain parts suppliers will utilize the code of a spare key to cut a brand new metal blade for less than that of a dealer. The key must, however, be identical to the original one to function properly in your car.
Follow these steps to replace the case. You'll need a flathead and a lot of patience. With the screwdriver, break off the plastic and then remove the emergency key. Once you have the case open, remove the electronic components and put them in the new case. Place the key with the correct badge inside the case.
Replacement Battery
The replacement battery for the Saab 9-3 is a cheap part that can be replaced easily and quickly. The YouTube video of Cyclone Cyd demonstrates how to replace the battery of the remote fob with only four steps. This tutorial can be used for any modern saab key fob though the process may vary slightly.
The first step is to locate the button that will release the backup key in the fob. This button is typically located on the back of the fob just below the Saab Logo. Next you will need a flathead screwdriver into the small hole in this button. This should be enough to let the fob case open in order to change the battery.
Once you have installed the new batteries CR1632, you can reassemble your remote key fob. You can then program it into your car. The procedure should take no more than a half hour at the most. It is a simple process that does not require any special tools.
If you lose a key the process is somewhat more complex however, it can be accomplished. The dealer has to determine the VIN of the car and then order a new key blade and a TWICE module with the exact unique code. After that, they will need to cut the replacement key and then program it using a brand new tool for programming called MDI.
Replacement Key Fob
The key fob is equipped with an internal battery that is used to lock and unlock your vehicle. Batteries are able to last for a short time and eventually die. It is a common problem that affects all cars. The good news is you can change the batteries in most key fobs, and not have to replace the entire case. Amazon sells replacement fobs with all the electronic components in place. It is easy to pop the case open and replace the batteries. It is important to keep in mind that you will need to take out the emergency key first. you can do this by inserting the small screwdriver flathead into the slot that is located in the middle of the case. Move the screwdriver around the case until it will split open, making it easy to take it out.
If you're planning to replace your keys, be sure to have a spare in your possession. This will save you a lot of money. If you have an extra key, you can request the dealer to cut it in half and program it to your car. This is less expensive than purchasing a new fob.
It is possible to add a second key to your vehicle If you don't already have one, but it takes a great deal of research and effort. The cost of adding a second key is around a hundred dollars and it requires programming of the car's computer. saab car key can do this, but it's an expensive option.
Replacement Ignition
As opposed to earlier Saab automobiles, the current SAAB 9-3 models feature an advanced alarm system that is built on a key code. If you lose only one key, it may be expensive to add another one, as the car has to have a specific computer installed and be programmed to accept a brand new key. Locksmiths typically aren't able to program this or even dealers can charge several hundred dollars just to program the new key!
Dealers will charge you top dollar to replace your car's computer (also known as the CIM or SAAB twice) in the event that you lose your only functioning key. We can reprogram the current EEPROM in your car computer so that it's prepared for a new key. This will save you more than 50% off what you would have to pay a dealer.
If you have owned a car like the SAAB 9-3 for quite a while and you're aware of the ignition keys aren't very durable. They can become extremely sticky, and the buttons are known to be ripped off every now and then which is why you should think about replacing your ignition key if it isn't working as it should. It's good to know that replacing the ignition key isn't as complicated as it seems and can be done fairly quickly using the right tools.